Step 1 - Add the Bol.com Repricer to your subscription
As the Repricer is a paid add-on, you need to add it to your current subscription before you can access and setup the Repricer. This article explains how you can add this add-on to your subscription. The costs are €49 per Repricer per country.
Step 2 - Repricer settings
After adding the Repricer to your subscription, navigate to API's > your Bol API. You can access the Repricer settings here under Settings:
To select the country market in the repricer, go to the repricer country setting and select The Netherlands or Belgium in the repricer country dropdown. You can only select one country. Choose the country for the repricer that matches the country in your product listing API. If your product listing API is connected to a Bol NL account, select the Netherlands in your country setting for the repricer. Failure to do so will cause the repricer to reprice against the wrong sellers. For example: If the API is connected to Bol NL, but the repricer is set to Belgium we will reprice the Bol NL offers against the sellers on Bol BE.
Here, you can select if you want the repricer to be active, inactive or on Dry-run. With the Dry-run status, you can preview all the price updates that the repricer would perform without actually implementing the price changes on Bol.com. When you are happy with your configuration and the previewed results, you can switch the repricer to active. The repricer updates will then be sent live to Bol.com.
Step 3 - Reprice Rules
In the Rules step of the Bol.com API, there is a separate tab for your Reprice rules:
Here, you can configure the parameters and strategy of the Repricer. Depending on the strategy, you can configure the following in a Reprice rule:
- Reprice settings
- Minimum/maximum price options
- Do not compete with ('Competitor targeting' strategy only!)
- Bol.com options
1. Reprice settings
In the Reprice settings part of a reprice rule, you can configure the following:
- Rule name: The name that will show in the rule overview.
- Strategy: Indicating which strategy you want to use for this rule. You can currently pick from the 'Buy box targeting' and 'Competitor targeting' strategies. If you want to know what these strategies mean, read this article.
- Minimum price: This field indicates the lowest price the repricer can go to. You can select a field of your choice here, for example a 'minimum_price' field you have calculated in the general Rules section.
- Maximum price: This field indicates the highest price you want to use.
IMPORTANT: We always try to undercut the price of the competitor with the lowest price offer. If the lowest price among the competing offers changes (i.e. because the competitor with the lowest price stops selling the product or increases his price), we will increase your price accordingly up to the value of your maximum price.
- Price difference for undercut ('Competitor targeting' only): Here you can indicate the price difference used to undercut the competitors with a static amount.
- Note: if you use the 'Buy box targeting' strategy, the price difference to undercut is 10 cents. Because the Buy box strategy continuously undercuts the price in trying to get the buy box, this cannot be changed.
2. Minimum/maximum price options
With these options, you can choose what happens in the repricer, either for 1) If there is no competition, or 2) If competition is below your minimum. The options are:
- Do not reprice: The repricer will not reprice the item,
- Go to minimum: The repricer will use the minimum price set in the Reprice settings,
- Go to maximum: The repricer will use the maximum price set in the Reprice settings.
Specifically for the 'Competitor targeting' strategy, there is an extra option for the 'If competition is below your minimum':
- Compete with next bestseller: The repricer will disregard the competitors that have too low prices for your minimum and will undercut the rest.
3. Do not compete with ('Competitor targeting' only)
If you use the 'Competitor targeting' strategy, you can configure parameters that indicate sellers you do not want to compete with. You can configure the following:
- Sellers with a rating lower than: this field indicates that you do not want to compete with sellers who have a seller rating lower than the indicated rating.
- Sellers with a delivery time longer than: this field indicates that you do not want to compete with sellers who have a delivery time that is longer than the indicated delivery time.
- Sellers with a review count lower than: this field indicates that you do not want to compete with sellers who have less reviews than the indicated amount.
- Specific sellers: here, you can also add specific individual sellers you do not want to compete with. You choose between 'Bol.com' and 'Seller'. If don't want to compete with a specific seller, you need to put in their Bol.com seller ID. This can be useful, for example, if you run a second seller account (i.e. a BE seller account) selling the same products.
In the example screenshot above, you will not compete with any sellers that have: a rating lower than 3.0, a delivery time longer than 4 days or a review count lower than 8, and you will not compete with the specific sellers 'Bol.com' and Bol.com seller with ID '123456789'.
4. Bol.com options
Here you can select if you want to use one of the Bol.com specific options: Commission reduction or Volume discount. These two options can be found in the Build step of the regular Bol API as well, but the repricer will overrule those settings. Therefore, you also have the option to include them in your repricer rules.
For more information on using Commission reduction in the repricer, read this article.
For more information on using Volume discount in the repricer, read this article.
In the last part of the Repricer rule, you can set certain conditions. This will influence which products are used for this specific rule. Setting these conditions works similar to how you would include or exclude products in the 'IF' condition in a regular rule.
By default, the repricer will include all products if you do not set any conditions. If you want to dynamically configure different repricer strategies, prices or other parameters for certain groups of products, you can use multiple Repricer rules in which you include the relevant products (and exclude the rest).
Step 4 - Check the results
When configuring the Reprice rules, you can check how a rule affects individual items. To do this, go to the desired Reprice rule, click on 'Save rule' and then on 'Selected items' on the right-hand side. You will see a list of all the items impacted by this rule. When you click on a single item, you will the item overview including the Prices on Bol.com, the Repricer settings, and the 'Do not compete with settings' (in case of 'Competitor targeting' strategy) for that product:
- The Prices on Bol.com show a list of the prices of different sellers on Bol.com (including you) and whether you compete with the seller in question or not.
- The Reprice settings show how the Reprice rule configures the parameters for this specific product: the minimum and maximum price, the strategy and the price difference for undercut.
- The Do not compete with shows the parameters of sellers you do not want to compete with for this product (Competitor targeting only).
You can also check what the Repricer updates will actually do in the Results step under 'Repricer updates'. In this overview you will see all the most recent price changes triggered by the Repricer. There are also different statuses:
- Dry Run: If you still have the Repricer status on Dry-run, the individual updates will also show this here.
- Sent: This means that this price is sent to Bol.com.
- Error: Channable encountered an error in sending the price update to Bol.com.
Another way to check the current repricer statistics is by navigating to Dashboard > Repricer. Here you can see an overview of the repricer statistics and you can also download this overview as CSV by clicking on 'Download as CSV'. If you have multiple repricers or you want a detailed overview, you can click on this repricer under channel and you will only see the statistics of this channel in a table. You can also download this overview by clicking 'Download as CSV'.
It is also possible to filter the items in the repricer previews (both the statistics preview and price rule preview), using one of the following filters:
- No filter
- Products with the buy box
- Products without the buy box
- Products with one seller
- Products with no data
- Products with errors
Products with no data are the products that we don't have any repricer information about. This can, for example, be because the item is out of stock and therefore not live on Bol.com at the moment. Another reason could be that the product is not matched by any price rule and therefore not tracked by the repricer.
The 'Products with errors'-filter currently only supports the errors where the EAN of the product is not the same EAN that Bol.com uses. This means we cannot use the repricer on this product until you change the EAN to the one Bol.com uses. More information about this error can be found here.
A big advantage is that you can also see the "repricer price" in these previews, which will help you compare your own prices with the current repricer prices in the blink of an eye. This will help you optimize your repricer setup even further.